Just an update, Baffles are on for good, just need to air seal fabric attached. In the pictures there is some purple tape on the lright front and left rear baffle. This covers the air bypass holes that brings air to the lower fins near the intake tubes that normally is stagnant.
Working air box, nearly ready for final install. I had to use the clearance blister and also a straight arm from the throttle body. The stock bent arm from the throttle body still hit the side of the cowl. Also, the blister supplied by Vans wasn't deep enough, so I added 2 pieces of 0.062" aluminum spacer to make the blister even more intrusive into air filter.
(Yes I wrapped the alternator with a paper towel to keep all the metal shavings out)
No comments:
Post a Comment