Just a quick update.
Center radio stack wiring nearly done. About 100 terminations so far. Only another 150 or so to go.
If you look closely at the picture, lots of things going on. For
example, supports modified to allow screens to be high on panel.
Connectors are mounted on brackets in approximate locations to allow
nice harness routing. Harness pass thru holes in sub panel. Fuse block
installed. Wires are labeled with printed heat shrink tubing. Splices and
terminations are inside back shells for greater reliability and better
EMI (don't try this at home, it can go wrong if not carefully done)
